Photo of Tales of the Arabian Nights – Protector Set, by Mantis Pinball

Tales of the Arabian Nights – Protector Set

The L shaped piece sits on the front edge of the bazaar scoop entrance screwed in from underneath the playfield. " Yes you will have to take off the scoop to install." I recommend pre-drilling the holes for ease of installation. The ring goes in the left pinball capture hole." It is designed to sit down into the hole protecting the edges of the hole." Take clear bathroom silicon and apply a bead under the lip of the ring and press into hole fitting it correctly." Some of the silicon may squirt out around the edge." This is normal." Take a paper towel and wipe up the excess silicon. " The silicon does several things." First it provides an additional cushion for impact." Second it holds the ring in place during game play." Should the ring ever break free just strip the old silicon and reinstall.
SKU:  38-39_Totan_prot_set_E1/F3

Game Compatibility

This part works in the following games:
Tales of the Arabian Nights